[PS-LB-NA-M20] LoRaWAN Analog Sensor (0~20mA, 0~ 30V sensor Interface - Without Sensor)

The Dragino PS-LB-NA-M20 is a LoRaWAN Analog Sensor for Internet of Things solution. PS-LB-NA-M20 has 5v and 12v output , 4~20mA, 0~30v input interface to power and get value from Analog Sensor. PS-LB-NA-M20 will convert the Analog Value to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.

The LoRa wireless technology used in PS-LB-NA-M20 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

PS-LB-NA-M20 supports BLE configure and wireless OTA update which make user easy to use.

PS-LB-NA-M20 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.

Each PS-LB-NA-M20 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

USER MANUAL :

PS-LB-NA_User_Manual

DATA SHEET :

PS-LB-NA_Datasheet

FIRMWARE :

PS-LB-NA_Firmware